### Lecture Description

goo.gl/9u1aIC for more FREE video tutorials covering Engineering Mechanics (Statics & Dynamics)

In this tutorial, the video presents a comprehensive example of static friction where it asks to find the coefficient of static friction based on the data given. First part of the video vividly illustrates the given problem where it has shown that a block of 10 Kg mass is rest upon on an inclined surface & the slope of the surface is given as 30 degree. The gravitational acceleration is also given as 10m/s2. Moving on, the video draws the FBD showing the actions of gravity force, normal force and friction force. In addition, the required angles of these forces are also shown over the FBD.

Next, the video applies the equilibrium principle and resolves force components into x & y direction and successively computes out the unknown values from the established equations. Later, the video introduces with the equation of static friction overviewed in the previous video & finally determine the coefficient of static friction putting the required values into the equation. Do on hand practices with the tutorial to have better understanding on the workout completed in this lesson.

### Course Index

- Scalars and Vectors
- Parallelogram Law and Triangle Method
- Unit Vectors and Components
- Vectors Example
- Vector Tower Example
- 3D Vectors
- 3D Vector Example (Part 1)
- 3D Vectors Example (Part 2)
- Introduction to Forces
- Introduction to Moments
- Moment Example 1
- Moment Example 2
- Moments and Couple Moments
- Equivalent Systems Theory and Example
- Distrubuted Loads
- Solving Distributed Loads and Triangular Loads
- Resolving Forces Advanced Example
- Introduction to Equilibrium
- Introduction to Free Body Diagrams (FBD)
- Free Body Diagram Example
- Introduction to Supports: Roller, Pin, Fixed
- Simply Supported Beams Free Body Diagram Example
- Cantilever Free Body Diagram Example
- Advanced Free Body Diagram Beam Example
- Introduction to Axial & Shear Forces and Bending Moments
- Axial, Shear and Bending Diagrams
- Method of Sections
- Method of Sections Simple Example
- Method of Sections Advanced Example Part 1
- Method of Sections Advanced Example Part 2
- Introduction to Hooke's Law
- Hooke's Law and Stress vs Strain
- Stress vs Strain Diagram
- Rectilinear Motion |
- Rectilinear Motion Examples |
- Rectilinear Motion with Variable Acceleration |
- Curvilinear Motion |
- Projectile Motion |
- Projectile Motion Formulae Derivations |
- Circular Motion and Cylindrical Coordinates |
- Polar Coordinates Example |
- Newton's Laws and Kinetics |
- Introduction to Work |
- Work Example |
- Power and Efficiency |
- Work and Energy Example |
- Potential Energy, Kinetic Energy & Conservation |
- Conservation of Mechanical Energy Example |
- Introduction to Impulse and Momentum |
- Impulse, Momentum, Velocity Example 1 |
- Impulse, Momentum, Velocity Example 2 |
- Introduction to Impact |
- Central Impact Example |
- Shear Force Diagram Example
- Bending Moment Diagram Example
- Shear and Bending Diagrams
- Beam Analysis Example Part 1
- Beam Analysis Example Part 2
- Introduction to Trusses
- Types of Trusses and Design Assumptions
- Method of Joints Truss Example
- Advanced Method of Joints Truss Example
- Introduction to Method of Sections
- Method of Sections Theory
- Method of Sections Truss Example
- Simple Frame Example
- Advanced Frames Example
- Introduction to Friction
- Static Friction Example
- Tipping vs Slipping Friction
- Introduction to Hyrdostatic Forces | Hyd
- Hydrostatic Forces Example | Hyd
- Centroids
- Finding Centroids by Integration
- Centroids of Composite Shapes Example
- Moment of Inertia
- Moment of Inertia Standard Shapes
- Parallel Axis Theorem Part 1
- Parallel Axis Theorem Part 2
- Average Normal Stress
- Average Stress Example
- Shear Stress Example
- Strain

### Course Description

Mechanics, the study of forces and physical bodies, underpins a very large proportion of all forms of engineering. A thorough understanding of mechanics is essential to any successful engineer. This course helps develop an understanding of the nature of forces with consideration for how they may be simplified in an engineering context. The conditions of equilibrium are then used to solve a number of problems in 2D and 3D before moving on to a broad range of topics including centroids, distributed loads, friction and virtual work. The course will also provide an introduction to dynamics, with a particular focus on the effects that forces have upon motion.